This chapter describes MMC messages. For information on message content and how to use the message, refer to the Introduction.
| MMC.001 |
Level: C-INFO
Short Syntax: MMC.001 Dscrd ATM pkt on int net_num, int is dwn.
Long Syntax: MMC.001 Discard ATM packet on interface net_num, because interface is down.
Description: ATM packet discarded
| MMC.002 |
Level: UI-ERROR
Short Syntax: MMC.002 switch_receive_frame. Unspprted msg (type= type) rcvd
Long Syntax: MMC.002 switch_receive_frame. Unsupported message type type received
Description: Unsupported message received at switch_receive_frame()
| MMC.003 |
Level: UI-ERROR
Short Syntax: MMC.003 func_name: int net_num is not regstrd
Long Syntax: MMC.003 func_name: interface net_num is not registered
Description: interface is not registered with device driver
| MMC.004 |
Level: UI-ERROR
Short Syntax: MMC.004 func_name: int net_num is not open
Long Syntax: MMC.004 func_name: int net_num is not open
Description: interface has not been opened in the dev
| MMC.005 |
Level: C-INFO
Short Syntax: MMC.005 Frame ACK timed out seq seq_num for int net_num msg type msg_type
Long Syntax: MMC.005 Frame ACK timed out sequence seq_num for interface net_num, message type msg_type
Description: Frame acknowledgement timer out in device driver.
| MMC.006 |
Level: DEBUG
Short Syntax: MMC.006 Initializing cpu_enet_init()
Long Syntax: MMC.006 Initializing cpu_enet_init()
Description: The cpu_enet_init() routine entered
| MMC.007 |
Level: DEBUG
Short Syntax: MMC.007 cpu_enet_ type_dscr_list: 0x addr
Long Syntax: MMC.007 cpu_enet_ type_dscr_list: 0x addr
Description: Print the CPU Enet TX/RX descriptor list
| MMC.008 |
Level: C-INFO
Short Syntax: MMC.008 cpu_enet_rx_dequeue: Discrdng rx frame value
Long Syntax: MMC.008 cpu_enet_rx_dequeue: Discarding rx frame value
Description: The cpu_enet_rx_dequeue routine is discarding an ATM packet
| MMC.009 |
Level: DEBUG
Short Syntax: MMC.009 Error dequeuing type bufs from enet
Long Syntax: MMC.009 Error dequeuing type buffers from enet
Description: Error dequeuing buffers in device driver
| MMC.010 |
Level: DEBUG
Short Syntax: MMC.010 enet_receive_frame: valid net_num cell cnt = int , debug , for
Long Syntax: MMC.010 enet_receive_frame: valid net_num, cell cnt = , i/f , debug , for "
Description: An iorb allocation failed
| MMC.011 |
Level: CI-ERROR
Short Syntax: MMC.011 tx frame over enet failed
Long Syntax: MMC.011 transmit frame over enet failed
Description: Attempt to transmit Ethernet frame failed
| MMC.012 |
Level: DEBUG
Short Syntax: MMC.012 ATM VCC INDEX 0x vcc_index LECID: lec_index
Long Syntax: MMC.012 ATM VCC INDEX 0x vcc_index LECID: lec_index
Description: Decodes an ATM -> CPU message
| MMC.013 |
Level: CI-ERROR
Short Syntax: MMC.013 addAtmConnection failed on net_num
Long Syntax: MMC.013 addAtmConnection failed on net_num
Description: addAtmConnection failed on this interface
| MMC.014 |
Level: C-INFO
Short Syntax: MMC.014 deleteAtmConnection failed - rc connection_ea , rc2, connection_ae
Long Syntax: MMC.014 deleteAtmConnection failed - rc connection_ea , rc2, connection_ae
Description: deleteAtmConnection failed
| MMC.015 |
Level: CI-ERROR
Short Syntax: MMC.015 func_name: illegal dist type
Long Syntax: MMC.015 func_name: illegal distribution type
Description: Illegal distribution type
| MMC.016 |
Level: DEBUG
Short Syntax: MMC.016 string
Long Syntax: MMC.016 string
Description: This is a generic string passed up from MMC
| MMC.017 |
Level: CI-ERROR
Short Syntax: MMC.017 nt net_num1 reliable msg buffer alloc failed
Long Syntax: MMC.017 nt net_num1 reliable msg buffer allocation failed
Description: Reliable message buffer allocation failed\r\n
| MMC.018 |
Level: CI-ERROR
Short Syntax: MMC.018 nt net_num1 func_name: unable to allocate buffer - dropping frame
Long Syntax: MMC.018 nt net_num1 func_name: unable to allocate buffer - dropping frame
Description: unable to allocate buffer
| MMC.019 |
Level: C-INFO
Short Syntax: MMC.019 nt net_num1 Frame ACK timed out seq seq_num - bcast msg type msg_type
Long Syntax: MMC.019 nt net_num1 Frame ACK timed out sequence seq_num - broadcast message type msg_type
Description: This message indicates that the frame ack failed for a reliable broadcast
| MMC.020 |
Level: CI-ERROR
Short Syntax: MMC.020 nt net_num1 func_name: msg buf alloc failed
Long Syntax: MMC.020 nt net_num1 func_name: message buffer allocation failed
Description: Frame structure allocation failed\r\n
| MMC.021 |
Level: C-INFO
Short Syntax: MMC.021 Resetting EPIF epif_num
Long Syntax: MMC.021 Resetting EPIF epif_num
Description: Resetting EPIF
| MMC.022 |
Level: CI-ERROR
Short Syntax: MMC.022 Reliable Msg Queue full - dropping msg type: msg_type
Long Syntax: MMC.022 Reliable Msg Queue full - dropping msg type: msg_type
Description: Reliable Msg Queue full - dropping msg
| MMC.023 |
Level: CI-ERROR
Short Syntax: MMC.023 Reliable Msg Entering Data Discard mode: num_messages
Long Syntax: MMC.023 Reliable Msg Entering Data Discard mode: num_messages
Description: The reliable message queue is entering data discard mode.
| MMC.024 |
Level: CI-ERROR
Short Syntax: MMC.024 Reliable Msg Exiting Data Discard mode: num_messages
Long Syntax: MMC.024 Reliable Msg Exiting Data Discard mode: num_messages
Description: The reliable has become uncongested and is returning to normal mode.